ActFax can be used with the following types of modems, ISDN boards and fax boards:

• Fax modems that support fax class 1, 1.0, 2 or 2.0
• ISDN boards that support the T.30 (Fax Group 3) protocol
• Diva Server boards from Dialogic/Eicon
• Fax boards from Brooktrout/Cantata
• Fax boards from Intel/Dialogic (Cpi series)
• RockForce boards from Mainpine
• VoIP/FoIP (Voice over IP/Fax over IP)

     Avoid low-cost modems

In general, we recommend to avoid using low-cost modems for faxing, since such modems are usually only tested for data and Internet connections and do not work very reliable in fax mode. Since a modem has do establish connections to hundrets of different fax machines, using low-cost modems often causes problems when connections to certain types of fax machines cannot be done.

We recommend the following modems, ISDN boards and fax boards to be used with ActFax:

     Analog Modems

Diamond Supra Express 56e Pro

Multitech MT5634ZBA

Zyxel Omni 56k

    Analog Multi-Modem Boards

Mainpine RockForce

Comtrol RocketModem

Eicon Diva Server Analog-4P/8P

Equinox Multimodem Adapters

Multitech Multimodem ISI

     ISDN Modems and ISDN Boards

AVM B1 V4.0 (1 x S0)

AVM C2 (2 x S0)

AVM C4 (4 x S0)

AVM Fritz!Card (1 x S0)

Digi Datafire Micro V (1 x S0)

Digi Datafire QuadMicro (4 x S0)

Eicon Diva Pro 2.0 (1 x S0)

Eicon Diva Server BRI 2M (1 x S0)

Eicon Diva Server 4BRI 8M (4 x S0)

Eicon Diva Server PRI 30M (1 x PRI)

HST Saphir III (1 x S0)

HST Saphir III ML (4 x S0)

HST Saphir V (1 x PRI)

    Intelligent Fax Boards

Brooktrout TR114 Series

Brooktrout TR1034 Series

Brooktrout Trufax Series

Brooktrout Trufax-BRI Series

     VoIP/FoIP (Voice over IP/Fax over IP)

Eicon Diva Server SoftIP Software